| Installing the latest update file includes all previous patches for this version of the software. |
| |
| |
|
Fixed a problem in hydraulics with elevation losses not showing.
|
| |
| |
|
Extended the boundary for selecting lateral line pipe during the pipe sizing process.
|
| |
| |
|
Corrected an issue with metric conversions on drip tubing during the Hydraulic Calculations.
|
| |
| |
|
Solved a problem with RainCAD™ connecting to DesignCAD 3D Max 16.2.
|
| |
| |
|
Changed the Legend command to adjust plant sizes based on the setting in the Plants Database if Automatic Plant Canopy Adjustment is disabled.
Corrected a problem in the Material/Estimate command when fittings were calculated as a percentage of pipe costs.
Re-installed the Export button in the Material/Estimate Viewer.
|
| |
| |
Changed the General Notes in the Plants Database from 255 characters to an unlimited number of characters.
Added the ability to associate an image with a plant in the Plants Database.
Added the ability to create Plant Palettes and the ability to assign one or more plants to each palette in the Plants Database.
Added the ability to sort plants by Palette name in the Plant Placement dialog box.
Added the ability to insert the image assigned to a plant into the drawing in the Plant Placement dialog box.
|
| |
| |
|
Solved a meteric conversion problem with area and volume calculations.
Enabled RainCAD 9.0 to operate with DesignCAD 3D Max 16.0.
|
| |
| |
|
Solved a meteric conversion problem with drip tubing in the material takeoff.
|
| |
| |
|
Adjusted the Distribution Analysis command to be even more precise on high resolution monitors.
|
| |
| |
|
Corrected a problem with the Total Flow command counting flow on valve-in-head sprinklers.
|
| |
| |
|
During automatic sprinkler placement within a boundary, the program would not retain the percent of diameter adjustment setting.
Made an adjustment to sprinkler placement during automatic placement within a boundary. In rare instances, the program would skip a sprinkler or place two on top of one another.
|
| |
| |
|
Changed mainline pipe sizing to account for programming changes in DesignCAD.
Made an adjustment to the hydraulic calculations on pressure loss or gain due to elevation change.
Solved an equipment selection problem in the Hydraulics Viewer.
|
| |
| |
|
Solved a problem with units conversion from US to Metric.
|
| |
| |
|
Solved a problem with plant symbols not loading in multiple colors.
|
| |
| |
|
Fixed a problem with plant hatching patterns not appearing correctly in the legend.
Corrected a problem with the General area not being placing within a grid on the legend.
Solved a problem with Golf arc patterns and symbols not appearing in the Layer Display Options box.
Reset the DesignCAD text size after placing a valve notation.
Limited the number of decimal places in each text box to 4 on the Precipitation Rate dialog box.
|
| |
| |
|
Resolved a problem with drip tubing spacing during automatic layout.
|
| |
| |
|
Fixed a problem with hatch pattern assignments when placing plant material on the design.
Changed the legend command to read the hatch pattern scale from the drawing and angle from the Plants Database.
Solved a problem with the DesignCAD Tickmark command effecting automatic sprinkler placement within a boundary line.
We now minimize the Meter/Pump Placement dialog box when inserting information to the design screen.
|
| |
| |
|
Fixed a problem with Hydraulic calculations not adjusting for elevation set at the sprinkler.
Solved a problem with automatic sprinkler placement within a boundary line not adjusting correctly for square or triangular layout or accepting a new body assignment.
Made minor adjustments to the fittings takeoff in the Material/Estimate command.
Resolved a conversion problem while placing sprinklers automatically within a boundary line when the Units or Measurement are set to Metric.
Found a limitation of 256 pieces of pipe and sprinklers per lateral line branch in the Automatic Pipe Sizing command.
|
| |
| |
|
Solved a problem with calculating the length of drip tubing during the Material/Estimate command.
|
| |
| |
|
Resolved a rare problem where multiple sprinklers may be positioned on top of each other when placing sprinklers automatically using the Within a Boundary command.
|
| |
| |
|
Added additional wording in error messages to assist technical support in tracking a problem.
Corrected a problem with prices for fittings appearing in the Material/Estimate command.
|
| |
| |
|
Solved a problem with the distribution analysis command locking up if sprinklers had been assigned to a zone and deleted from the drawing prior to removing them from their zone assignments.
|
| |
